ProductOverview
JSS component is missing React implementation. See the developer console for more information.
Typical Applications
Gyprock Plus is typically used as a wall lining option in residential applications but can also be used on ceilings with standard 450mm joist centres. It is most suitable for areas of the home where exposure to moisture is not a concern such as bedrooms, living areas and entrance ways.
Recommendation
Gyprock Plus is best for ceilings with standard 450mm joist centres. In situations where the ceiling joists span 600mm centres, it is best to select Gyprock Supaceil.
Available Edge Profiles
Recessed edge (RE) profile – both long edges of the board feature a recess that tapers approximately 60mm in from the edge. Recesses enable jointing, and are easily covered by standard size cornice and skirting. This is the standard choice of profile.
Optimised Core™ technology
- Stronger - more robust with better breaking strength for improved handling and installed performance
- Lighter - easier to lift for better sheet manoeuvrability and improved flex
- Significantly improved score and snap - for crisp edges and cleaner cuts
Technical Specifications
Gyprock Plus is available in the following sizes:
| Thickness | 10mm |
| Widths | 1200mm 1350mm |
| Lengths | 2400mm 2700mm 3000mm 3600mm 4200mm 4800mm 5400mm 6000mm |
| Edge Profiles | Recessed Edge for regular jointing, Recessed Edge/Square Edge for low profile architectural mouldings |
Stockholdings of specific sizes may vary in different regions. Click HERE for a list of stocked sizes in your state
For the latest product availability in your area and to place an order, contact your nearest supplier.
Gyprock Plus is manufactured by CSR Gyprock in Australia to stringent product specifications.
Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.
Storage: Protect plasterboard and cornice from weather and moisture. Avoid products sagging by storing horizontally, supported on a level platform or full-width support members spaced at max. 600mm centres.
Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.
| Nominal Thickness | 10mm ± 0.5mm |
| Nominal Widths | 1200 and 1350mm ± 3mm |
| Nominal Lengths | From 2400 to 6000mm ± 5mm, typically in 300mm increments |
| Squareness | Cut ends ± 3mm in the width of the board |
| Nominal Board Weight* | 5.7kg/m2 |
| Thermal Resistance | 0.04-0.05 m2K/W |
| Fire Hazard Properties∆ | Group No = 1 SMOGRARC <100 m2/s2 |
| Combustibility◊ |
Plasterboard may be used wherever a non-combustible material is required. |
| Total Recycled Content | 7.0% |
* Subject to reasonable manufacturing variance
∆ In accordance with AS ISO 9705 and AS 5637.1
◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).
PromoContent
JSS component is missing React implementation. See the developer console for more information.